Main Ingredients
Synthetic resin, synthetic rubber, thicken resin, environment-friendly solvent oil, butane, propane, dimethyl ether etc.
Uses
Used for bonding the surface of lightweight materials such as EPS, Polystyrene foam, etc.
Advantages
◆ Fast and aggressive tack and easy application.
◆ High solids and spray on larger area(1.5 - 2 times) than the current similar spray adhesive.
◆ The spraying grain is thin and even, low penetration, not corrode materials and save adhesive.
◆ 15-20 minutes of leading time, enhance work flexibility and improve efficiency.
◆ Widely used for factory, company and home.
Precautions
◆ This product is packed under pressure, and is easy to explode when it is near heat.
◆ Store away from heat and fire source, or store out of direct sunlight for long time.
◆ Please keep the product out of kid’s reach.
◆ After finish the adhesive inside dump at the place there is no people and puncture the tank wall with iron nail.
◆ Store it under 49℃ in well ventilated and cool place.
◆ Contact with eye, wash with a mount of water and see doctor immediately. Contact with skin, wash with soap and water.
Storage
2 years in normal temperature. If the adhesive does not go bad after 2 years, it still can be used.
Executive Standard
National standard: GB18583-2008
Enterprise standard: Q/TQ003-2008